Mass Epoxy Supplies
Sand Epoxy
Sand Epoxy
- Final Sale
Couldn't load pickup availability
A durable, high-gloss decorative coating for interior floors.
*Ships First Week of December
Sand Epoxy is a 100% solids, two-component self-leveling epoxy designed to create a seamless, durable floor coating. Formulated for excellent chemical resistance, impact resistance, and strong adhesion, it provides a high-build finish with a smooth, high-gloss appearance.
For added UV stability and abrasion resistance, Polyaspartic 930 Topcoat is required.
Where You Can Use It:
Designed for interior applications, Sand Epoxy is ideal for:
- Kitchens and bathrooms
- Basement floors
- Utility rooms
- Breakrooms
- Foyers and entryways
Please Note: Sand Epoxy Smooth is intended for indoor use only. It creates a smooth surface and is not recommended for areas exposed to moisture where slipping may be a concern. Not recommended for patios, pool decks, or other outdoor applications.
Applications:
✓ Concrete, Pavers, Brick, Plywood, Plank Wood Floors, Tile
✗ Linoleum, Formica, Limestone, VCT, Rocks, Dirt, Asphalt
Preparation:
All surfaces must be clean, dry, and properly prepared before application. Refer to the Technical Data Sheet for complete surface preparation requirements.
Concrete and cementitious based surfaces should be mechanically ground or chemically etched. If ground/sanded, all dust and debris should be removed. If etched, we recommend Eco-Etch 1001, a non-acid based etching product.
Plywood and wood floors should be free of other coatings and or sealers. Nail holes filled and sanded. Sand surfaces if they have been coated with sealers/urethanes. OSB or particle board should be first coated with Vapor-Tek 440DF as a base coat.
Tile should be etched and sanded and left with a textured surface for best bonding.
Mixing:
Sand Epoxy comes in prepackaged 4-gallon kits containing Part A and Part B in a 3:1 ratio by volume. Kits must be used in their entirety and should not be divided or combined with other kits.
- Mix Part A in its original container at low speed for 1 minute.
- Add Part B to Part A and mix thoroughly for 3 minutes until completely uniform.
- Immediately pour the mixed material onto the floor in a long bead.
- Spread evenly using a 15–20 mil notched squeegee to achieve a uniform thickness.
- Back-roll with a spike roller while the material is still wet to minimize application lines and help the coating self-level.
Colors:
Tidal and Gravel are both available now! And there's more to come... Two new shades are on the way, including a white, and tan. Stay tuned!
Packaging:
Available in a 4-gallon kit containing Part A and Part B. Kits are prepackaged and must be mixed and used in their entirety.
For complete application instructions, technical specifications, and product requirements, please refer to the Technical Data Sheet.
Coverage Rates:
- 20 mil 80 SF per Gallon 320 SF per kit
- 30 mil 60 SF per Gallon 240 SF per kit
- 40 mil 40 SF per Gallon 160 SF per kit
4 Gallon Kit Prices:
Share
